MAINTENANCE

Check mounting points (clamps & bolts) after the first 1000Km, and 5000Km intervals thereafter.
Check regularly that all screws and fasteners holding windows, doors and locks are tight.
Daily checks of fasteners recommended when travelling on corrugated dirt roads.
Gas struts are self lubricating; keep clean with a damp cloth only.
Wax the paintwork as required; do not use abrasive compounds.
Lightly coat the door and window rubber assemblies with a silicon based spray during periodic cleaning.
External plastics and rubbers can be protected with a silicon based spray.
Lubricate window hinges, lock mechanisms and key recesses regularly using quality grease.
Remove rear/side locking mechanism inner cover to clean and lubricate moving metal joints/parts periodically.
Replace tailgate protection tape periodically to prevent paint scuffs.
Do not drive with canopy liftup windows and doors, or ute lids, in the open position, or with unsecured tray sideboards.
Do not drive with an unsecuredloads.
Do not overload roof racks; Roof rack ratings apply to loads spread over 2 bars evenly.